1-866-494-4610

Barber Colman (Schneider Electric) VBS2N17 DuraDrive 2-Way Stainless Steel Trim Valve Body 3/4" 10Cv

Barber Colman (Schneider Electric) VBS2N17 DuraDrive 2-Way Stainless Steel Trim Valve Body 3/4" 10Cv
Images for general purposes only. Actual may be different than depicted.
Barber Colman (Schneider Electric) VBS2N17 DuraDrive 2-Way Stainless Steel Trim Valve Body 3/4" 10Cv

Barber Colman (Schneider Electric) VBS2N17 DuraDrive 2-Way Stainless Steel Trim Valve Body 3/4" 10Cv

SKU: VBS2N17
In Stock 1
Rating:
$131.44 /ea
Qty of 6 - $124.87 /ea
Qty of 12 - $118.30 /ea
0
$0.00
0
$0.00
0
VBS Series Ball Valve Assemblies

The DuraDrive VBS Series valves are TwoWay or Three-way, 1/2” or 3/4” (15 mm or 20 mm), characterized ball valves. The M1 and M2 series actuators are direct coupled to the VBB/VBS series valves and accept two-position, floating or proportional control signals from a DDC system, controller, or thermostat for control of hot or chilled water, or solutions of up to 60% glycol. Typical applications include VAV reheat, fan coil units, hot and chilled water coils in air handling units, heat pumps and unit ventilators.

Features:
  • Easy product selection — all • actuators fit all valve bodies.
  • Fast, easy actuator installation — no linkage or tools required.
  • Flow characterizing insert provides equal percentage flow characteristic for stable, accurate floating and proportional control.
  • ANSI IV seat leakage (0.01%) for both Two-Way and Three-way valves (A and B port).
  • Brass and stainless steel trim models.
  • Cvs from 0.3 to 10.
  • Normally open, normally closed, and non-spring return assemblies available.
  • Two-position, Floating or Proportional (0 to 5 Vdc, 0 to 10 Vdc, 5 to 10 Vdc, or 4 to 20 mAdc, jumper selectable)
  • Proportional actuator is direct or reverse acting, jumper selectable.
  • RoHS Compliant (VBS Assemblies)
  • Reach Compliant
Service Hot and chilled water, up to 60% glycol
System Static Pressure Limits 600 psi (4137 kPa)
Fluid Temperature Limit 20 to 250°F (-7 to 121°C)
Close-off Pressure 130 PSI
Material Body- Forged Brass; Stem- Stainless Steel; Ball- Stainless Steel; Seat- PTFE

Following are the Attached files for this product:

Barber Colman VBS Series Ball Valve Assembly Technical Datasheet

Q & A: Ask the Questions, share answers

Do you have questions about this product?